Adina East James Bay lithium exploration update
Released
Released
Announcement PDF
ASX Announcement
22 November 2023
Adina East James Bay lithium exploration update
HIGHLIGHTS
• First-pass ground reconnaissance program successfully completed at the Adina East Project
• Multiple peraluminous pegmatite outcrops identified and sampled1
• Aluminous minerals (tourmaline, beryl, garnet and muscovite), commonly found along with
spodumene, identified in multiple pegmatite outcrops and boulders2
• XRF analysis of pegmatite samples to determine mineralogy and identify presence of
spodumene underway with results due in early December 2023
• Historic reports of pegmatite outcrops confirmed during the field program with the pegmatites
being broadly coincident with targets identified during recent multispectral analysis3
• Follow up exploration program is being developed with a focus on reviewing existing
geophysical data across the project and defining target areas for further exploration
Pinnacle Minerals Limited (ASX: PIM) (“Pinnacle”, the “Company”) is pleased to announce that following the
execution of a conditional agreement to acquire the Adina East Project4 (“The Project”), located in the fertile
LaGrande belt of the James Bay area, Northern Québec, the Company has moved rapidly and successfully
completed its initial on-ground reconnaissance exploration program.
Satellite and radar analysis identified numerous lithium targets over
the company’s Adina East Project. The reconnaissance field program
focussed on these areas and successfully identified multiple instances
of aluminous pegmatite outcrops and boulders at surface.
Mineral analysis of samples to be undertaken to determine the
mineralogy (including the presence of spodumene) with results due
early December 2023.
Fourteen (14) samples have been sent to the laboratory for assays with
results expected in 5-6 weeks (early January 2024).
Pinnacle plans to follow up this initial round of reconnaissance
exploration with further field mapping and sampling in Q2 2024 with
thorough traverses across the project area.
Figure 1: Pegmatite outcrop 160090007
Pinnacle Minerals Managing Director, Nic Matich, commented:
“The identification of fractionated pegmatite outcrops in the Adina East claims is a significant step
forward in the company’s Canadian exploration endeavours. These results, coupled with the lithium
exploration success by our neighbours Winsome Resources, Loyal Lithium, and Rio Tinto in the Trieste
Greenstone belt, further support the Company to return in early 2024 and expand upon the exploration
conducted to date. The time spent on site was limited by the onset of the Canadian winter and the bulk
of the project remains unexplored, providing substantial opportunity for the Company.”
1 & 2 – Appendix 1, 3 & 4 – Pinnacle Minerals Limited ASX announcement 17th October 2023
Pinnacle Minerals Ltd
Issued Capital
Australian Registered Office
Directors
ACN: 655 033 677
ASX: PIM
36,375,200 Shares
33,037,634 Options
Unit 6, Level 1, 389 Oxford Street
Mount Hawthorn WA 6016
T: + 61 8 9426 0666
E: admin@pinnacleminerals.com.au
WILLIAM WITHAM – Executive Chairman
NIC MATICH – Managing Director
LINCOLN LIU – Non-Executive Director
STEPHEN ROSS – Non-Executive Director
www.pinnacleminerals.com.au
Reconnaissance work program
The Adina East Project in Quebec’s James Bay region (Figure 3) totals 147 claims encompassing 72.7km2
(7,274.47 ha) adjacent to an interpreted extension of the Trieste greenstone belt. The Project is located 24km
from Winsome Resources’ (ASX.WR1) Adina Project which recorded 1.34% Li2O over 107.6m5 and grades up to
up to 4.89% Li2O6. The Project is also adjacent to the Loyal Lithium (LLI.ASX) Trieste Project and the Winsome
Resources (WR1.ASX) Tilly Project.
Dirt Exploration acquired, processed and analysed Sentinel Multispectral data (Sentinel) and Synthetic Aperture
Radar (SAR) data over the Adina East Project prior to the field program. The analysis identified multiple areas
of interest with 60 discrete targets identified.
A reconnaissance mapping and rock sampling program was developed and conducted during late October. The
program was managed and conducted by the experienced Quebec-based company IOS Geosciences (IOS).
Preliminary indications from the field have confirmed the presence of multiple pegmatite occurrences within
the Adina East Project. Field locations where both pegmatitic outcrop and pegmatite boulders are highlighted
in Figure 2.
Initial visual assessment by field geologists suggests the mineral assemblages contain a mineral assemblage
that may be indicative of a spodumene differentiation trend, including tourmaline, beryl, garnet and muscovite
(Figure 3 and Figure 4). Details of each sample location are included in Appendix 1. The geochemistry of these
pegmatite samples is yet to be quantified via laboratory analysis. Assay results are expected to be returned
within 5-6 weeks, by early January 2024.
Figure 2: Sample locations (pegmatite lithologies)
5 - Winsome Resources (ASX:WR1) ASX Announcement: “Strong lithium mineralisation from first Adina assays” – 6 January 2023
6 - Winsome Resources (ASX:WR1) ASX Announcement: “Exceptional High Grade Lithium Assays from Adina” - 1 September 2022
www.pinnacleminerals.com.au
2
Figure 3: Pegmatite boulder 16009008
Figure 4: Closeup of pegmatite outcrop
highlighting abundant tourmaline 160090007
Figure 5: James Bay Province Highlighting Adina East Project Location.
www.pinnacleminerals.com.au
3
Cautionary note:
The geochemical nature of the pegmatitic geological outcrops are currently unknown and the presence of pegmatitic
lithologies does not necessarily indicate the presence of lithium, tantalum or caesium mineralisation. Only laboratory
chemical assays can determine the presence and grade of any mineralisation.
This announcement has been authorised for release by the Board of Pinnacle Minerals Ltd.
For further information, please contact:
Executive Chairman
William Witham
Pinnacle Minerals Limited
T: + 61 (0) 8 9426 0666
E: admin@pinnacleminerals.com.au
Managing Director
Nic Matich
Pinnacle Minerals Limited
T: + 61 (0) 8 9426 0666
E: admin@pinnacleminerals.com.au
Media and Investor Inquiries
Jane Morgan
Jane Morgan Management
+61(0) 405 555 618
E: jm@janemorganmanagement.com.au
About Pinnacle Minerals
Pinnacle Minerals Ltd (ASX: PIM) is an ASX listed technology minerals company focused on delivering
shareholder value via the systematic exploration and development of its portfolio of battery and technology
metals projects in Canada, Western Australia and South Australia. Pinnacle aims to deliver exploration success
via systematic and geologically rigorous techniques. The Company’s focus is the “Adina East Project” in James
Bay, Quebec which is proximal to the world class Adina Lithium Project (Winsome Resources: WR1.ASX) and
adjacent to the Trieste Lithium Project (Loyal Lithium: LLI.ASX) and the Tilly Lithium Project (WR1.ASX). The
Company’s Australian exploration assets are prospective for Rare Earth Elements, Mineral Sands and Kaolin.
Forward Looking Statements
This announcement contains ‘forward-looking information’ that is based on the Company’s expectations,
estimates and projections as of the date on which the statements were made. This forward-looking information
includes, among other things, statements with respect to the Company’s business strategy, plans,
development, objectives, performance, outlook, growth, cash flow, projections, targets and expectations,
mineral reserves and resources, results of exploration and related expenses. Generally, this forward-looking
information can be identified by the use of forward-looking terminology such as ‘outlook’, ‘anticipate’, ‘project’,
‘target’, ‘potential’, ‘likely’, ‘believe’, ‘estimate’, ‘expect’, ‘intend’, ‘may’, ‘would’, ‘could’, ‘should’, ‘scheduled’, ‘will’,
‘plan’, ‘forecast’, ‘evolve’ and similar expressions. Persons reading this announcement are cautioned that such
statements are only predictions, and that the Company’s actual future results or performance may be
materially different. Forward looking information is subject to known and unknown risks, uncertainties and
other factors that may cause the Company’s actual results, level of activity, performance, or achievements to
be materially different from those expressed or implied by such forward-looking information.
Competent person statement
The information in this announcement that relates to Exploration Targets, Exploration Results, Mineral
Resources or Ore Reserves is based on information compiled by William Witham, a Competent Person who is
a Member of The Australian Institute of Geoscientists (AIG). William Witham is a director of Pinnacle Minerals
Ltd. William Witham has sufficient experience that is relevant to the style of mineralisation and type of deposit
under consideration and to the activity being undertaken to qualify as a Competent Person as defined in the
2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore
Reserves’. William Witham consents to the inclusion in the presentation of the matters based on his information
in the form and context in which it appears.
www.pinnacleminerals.com.au
4
Pinnacle Minerals engaged IOS Geosciences (IOS) to execute the prospecting and exploration work described
in this release. IOS has an experienced team of explorers based in Saguenay and is managing several projects
in the James Bay region. This report contains information related to exploration results and is based on
preliminary information and data compiled or reviewed by IOS under the supervision of Mr. Réjean Girard, who
is classified as a Professional Geoscientist (P. Geo) with the respective professional regulatory body, the Order
of Geologists of Quebec. Mr. Girard has also reviewed this news release.
Figure 6: Pinnacle Minerals Project Location Map
www.pinnacleminerals.com.au
5
Appendix 1 Table 1: Outcrop and Boulder Lithology (Sample locations)
No lithium mineralisation is directly reported within samples taken from the Adina East Project. At this stage of exploration, all samples retrieved represent early stage
exploration sampling to understand the background geochemistry of reported pegmatites.
Table 1: Field Samples, locations, and descriptions
Sample ID
160090001
160090002
160090003
160090004
160090005
160090007
160090008
160090009
160090051
160090052
160090053
160090055
160090057
160090058
Easting
Northing
(NAD83 Z18)
(NAD83 Z18)
Outcrop
Boulder
Lithology
700260.4
700314.8
700477.9
696350.6
696293.7
696708.9
696506.1
692176.3
695775.3
709647.6
699939.6
695483.6
691306.7
692514.0
5903092.3
5907463.1
5907275.5
5904850.3
5904472.6
5904796.6
5905739.5
5902786.4
5906864.8
5905559.3
5907409.9
5907108.0
5900939.0
5900388.8
Boulder
Boulder
Boulder
Outcrop
Boulder
Outcrop
Boulder
Boulder
Boulder
Boulder
Boulder
Boulder
Boulder
Outcrop
Granitoid rich in quartz
Granitoid rich in quartz
Granite with feldspar (Alkaline)
Pegmatite (granitic)
Pegmatite (granitic)
Pegmatite (granitic)
Pegmatite (granitic)
Pegmatite (granitic)
Pegmatite (granitic)
Pegmatite (granitic)
Iron Formation
Pegmatite (granitic)
Pegmatite (granitic)
Pegmatite (granitic)
www.pinnacleminerals.com.au
Description
Granite with two micas (biotite and muscovite) and potentially beryl or apatite
White granitoid with very low to no mica content. Contains mm-sized non-magnetic oxides
Low mica content (biotite) pegmatitic granite. Contains clusters of magnetite.
Outcrop of gneiss with injection of white biotite bearing pegmatite.
Cluster of pluri-metric angular boulders of white biotite and tourmaline-bearing pegmatite with aplite and shreds of gneiss.
Outcrop of pegmatite with tourmaline, muscovite and biotite. Contains a white tabular mineral Query: feldspar
Pegmatite containing biotite and garnet.
Pink and white biotite-bearing pegmatite associated with an orthogneiss.
Pegmatite containing quartz, feldspar, tourmaline and blue-greenish crystals. Query: beryl.
Quartz, feldspar, muscovite and biotite bearing pegmatite.
Query: iron formation
Pegmatite boulders containing quartz, feldspar, muscovite, garnet and potential beryl
Boulder of quartz, feldspar and biotite pegmatite.
Dyke of quartz, feldspar, biotite and magnetite pegmatite.
6
Appendix 2 JORC Tables
Section 1 Sampling Techniques and Data
Criteria
JORC Code explanation
Sampling
techniques
•
•
•
•
Drilling
techniques
•
Drill sample
recovery
•
•
•
Logging
•
Nature and quality of sampling (e.g., cut channels, random chips,
or specific specialised industry standard measurement tools
appropriate to the minerals under investigation, such as down
hole gamma sondes, or handheld XRF instruments, etc.). These
examples should not be taken as limiting the broad meaning of
sampling.
Include reference to measures taken to ensure sample
representivity and the appropriate calibration of any
measurement tools or systems used.
Aspects of the determination of mineralisation that are Material
to the Public Report.
In cases where ‘industry standard’ work has been done this would
be relatively simple (e.g., ‘reverse circulation drilling was used to
obtain 1m samples from which 3 kg was pulverised to produce a
30 g charge for fire assay’). In other cases, more explanation may
be required, such as where there is coarse gold that has inherent
sampling problems. Unusual commodities or mineralisation
types (e.g., submarine nodules) may warrant disclosure of
detailed information.
Drill type (e.g., core, reverse circulation, open-hole hammer,
rotary air blast, auger, Bangka, sonic, etc.) and details (e.g., core
diameter, triple or standard tube, depth of diamond tails, facesampling bit or other type, whether core is oriented and if so, by
what method, etc.).
Method of recording and assessing core and chip sample
recoveries and results assessed.
Measures taken to maximise sample recovery and ensure
representative nature of the samples.
Whether a relationship exists between sample recovery and grade
and whether sample bias may have occurred due to preferential
loss/gain of fine/coarse material.
Whether core and chip samples have been geologically and
geotechnically logged to a level of detail to support appropriate
www.pinnacleminerals.com.au
Commentary
•
Rock chip sampling is associated with the reconnaissance mapping and sampling program
which aimed to confirm historical pegmatite reports, by both locating both previous and
sampling pegmatite outcrops or boulders.
Work described in the release has involved review of the publicly available datasets which are
available through the ‘Geomining Information System of Quebec’ - sigeom.mines.gouv.qc.ca
Ministère des Resources Naturelles et des Forêts (MERN), the Quebec geological survey (QGS),
documents historical mapping over the Adina East Project areas; and surrounding region with
rock descriptions publicly available.
No assay data is available for MERN samples/mapping points.
•
No drilling is reported.
•
No drill samples have been taken.
•
No drilling completed.
•
Geological observations are both preliminary and qualitative. The information contained
•
•
•
7
Criteria
JORC Code explanation
•
•
Sub-sampling
techniques and
sample
preparation
•
•
•
•
•
•
Quality of
assay data and
laboratory tests
•
•
•
Verification of
sampling and
assaying
•
•
•
•
Mineral Resource estimation, mining studies and metallurgical
studies.
Whether logging is qualitative or quantitative in nature. Core (or
costean, channel, etc) photography.
The total length and percentage of the relevant intersections
logged.
If core, whether cut or sawn and whether quarter, half or all core
taken.
If non-core, whether riffled, tube sampled, rotary split, etc., and
whether sampled wet or dry.
For all sample types, the nature, quality and appropriateness of
the sample preparation technique.
Quality control procedures adopted for all sub-sampling stages
to maximise representivity of samples.
Measures taken to ensure that the sampling is representative of
the in-situ material collected, including for instance results for
field duplicate/second-half sampling.
Whether sample sizes are appropriate to the grain size of the
material being sampled.
The nature, quality and appropriateness of the assaying and
laboratory procedures used and whether the technique is
considered partial or total.
For geophysical tools, spectrometers, handheld XRF instruments,
etc., the parameters used in determining the analysis including
instrument make and model, reading times, calibrations factors
applied and their derivation, etc.
Nature of quality control procedures adopted (e.g., standards,
blanks, duplicates, external laboratory checks) and whether
acceptable levels of accuracy (i.e., lack of bias) and precision have
been established.
The verification of significant intersections by either independent
or alternative company personnel.
The use of twinned holes.
Documentation of primary data, data entry procedures, data
verification, data storage (physical and electronic) protocols.
Discuss any adjustment to assay data.
www.pinnacleminerals.com.au
Commentary
within describes only dominant outcrop lithologies at discreet locations, and minerals of
interest.
•
All data is stored in digital format for use in GIS software packages.
•
The final field report which remains pending will contain more accurate geological
descriptions including geochemical assay data.
•
Sampling is at the discretion of field geologists undertaking the geological reconnaissance
activities.
•
At this early stage of exploration discretionary grab samples are considered appropriate.
•
No QAQC processes have been utilised at this early stage of exploration.
•
No assay data or laboratory test work is reported.
•
•
No data verification has occurred.
The company has verified the presence of historically reported outcrop lithologies during the
reconnaissance phase of exploration works.
8
Criteria
JORC Code explanation
Location of
data points
•
Data spacing
and
distribution
Orientation of
data in relation
to geological
structure
•
•
•
•
•
•
•
Sample security
•
Audits or
reviews
•
Commentary
Accuracy and quality of surveys used to locate drill holes (collar
and down-hole surveys), trenches, mine workings and other
locations used in Mineral Resource estimation.
Specification of the grid system used.
Quality and adequacy of topographic control.
Data spacing for reporting of Exploration Results.
Whether the data spacing and distribution is sufficient to
establish the degree of geological and grade continuity
appropriate for the Mineral Resource and Ore Reserve estimation
procedure(s) and classifications applied.
Whether sample compositing has been applied.
Whether the orientation of sampling achieves unbiased sampling
of possible structures and the extent to which this is known,
considering the deposit type.
If the relationship between the drilling orientation and the
orientation of key mineralised structures is considered to have
introduced a sampling bias, this should be assessed and reported
if material.
The measures taken to ensure sample security.
•
•
All geological maps utilising NAD83 / UTM zone 18N are sufficiently annotated.
All reported locations are assumed to have a +/- 10m accuracy via use of handheld GPS
instruments.
•
•
•
Data points are guided by field outcrops instead of regular spacing.
Exploration data contained within is not appropriate for calculating Mineral Resources.
Insufficient exploration has been completed at this stage to warrant such calculations. •
No compositing of results has been reported in this announcement.
•
•
Field observation points are guided by outcrop location instead of specific orientation.
No relationship between outcrop mapping sites is known.
•
Field samples have been collected and stored by IOS Geosciences, under the supervision of
Mr. Réjean Girard P.Geo QP and a Member of the Ordre des geologues du Quebec.
The results of any audits or reviews of sampling techniques and
data.
•
•
No independent audits or reviews of sampling techniques and data has been conducted.
Internal reviews undertaken
www.pinnacleminerals.com.au
9
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria
JORC Code explanation
Mineral
tenement and
land tenure
status
•
•
Type, reference name/number, location and ownership including
agreements or material issues with third parties such as joint
ventures, partnerships, overriding royalties, native title interests,
historical sites, wilderness or national park and environmental
settings.
The security of the tenure held at the time of reporting along with
any known impediments to obtaining a licence to operate in the
area.
Commentary
•
•
•
•
•
•
•
Exploration
done by other
parties
•
Geology
•
Drill hole
Information
•
•
Data
aggregation
methods
•
•
Acknowledgment and appraisal of exploration by other parties.
The Adina East is located in the James Bay Region of Quebec, Canada.
The Adina East Project is 100% owned by ED Spod 1 Corp.
Pinnacle Minerals Ltd signed a binding term sheet on 16th October 2023 to acquire 75% of the
Adina East Project.
The Adina East Project is comprised of 147 claims encompassing 72.7km2 (7,274.47 ha)
Lithium Royalty Corp retains a 2.0% Gross Revenue Royalty
Noranda Royalties Inc retains a 2.0% Gross Revenue Royalty, of which 1.0% may be bought
back by the Company at any time for C$3.0 million.
All claims are in good standing and are presented in this announcement.
•
Geological datasets were sourced from Ministère des Resources Naturelles et des Forêts
(MERN), the Quebec geological survey.
No other data by prior explorers is known to the company.
Deposit type, geological setting and style of mineralisation.
•
The mineralisation style sought at the Adina East Project is Lithium bearing pegmatites.
A summary of all information material to the understanding of
the exploration results including a tabulation of the following
information for all Material drill holes:
o easting and northing of the drill hole collar
o elevation or RL (Reduced Level – elevation above sea level in
metres) of the drill hole collar
o dip and azimuth of the hole
o down hole length and interception depth
o hole length.
If the exclusion of this information is justified on the basis that
the information is not Material and this exclusion does not
detract from the understanding of the report, the Competent
Person should clearly explain why this is the case.
In reporting Exploration Results, weighting averaging techniques,
maximum and/or minimum grade truncations (e.g., cutting of
high grades) and cut-off grades are usually Material and should
be stated.
Where aggregate intercepts incorporate short lengths of high-
•
•
No drillholes have been reported.
No relevant material data has been excluded from this report.
•
No exploration results have been reported.
www.pinnacleminerals.com.au
•
10
Criteria
JORC Code explanation
•
grade results and longer lengths of low-grade results, the
procedure used for such aggregation should be stated and some
typical examples of such aggregations should be shown in detail.
The assumptions used for any reporting of metal equivalent
values should be clearly stated.
These relationships are particularly important in the reporting of
Exploration Results.
If the geometry of the mineralisation with respect to the drill hole
angle is known, its nature should be reported.
Relationship
between
mineralisation
widths and
intercept
lengths
•
Diagrams
•
Balanced
reporting
•
Other
substantive
exploration
data
•
Further work
•
The nature and scale of planned further work (e.g., tests for
lateral extensions or depth extensions or large-scale step-out
drilling).
•
Diagrams clearly highlighting the areas of possible extensions,
including the main geological interpretations and future drilling
areas, provided this information is not commercially sensitive.
•
•
If it is not known and only the down hole lengths are reported,
there should be a clear statement to this effect (e.g., ‘down hole
length, true width not known’).
Appropriate maps and sections (with scales) and tabulations of
intercepts should be included for any significant discovery being
reported. These should include, but not be limited to a plan view
of drill hole collar locations and appropriate sectional views.
Where comprehensive reporting of all Exploration Results is not
practicable, representative reporting of both low and high grades
and/or widths should be practiced to avoid misleading reporting
of Exploration Results.
Other exploration data, if meaningful and material, should be
reported including (but not limited to): geological observations;
geophysical survey results; geochemical survey results; bulk
samples – size and method of treatment; metallurgical test
results; bulk density, groundwater, geotechnical and rock
characteristics; potential deleterious or contaminating
substances.
www.pinnacleminerals.com.au
Commentary
•
No drill results are reported.
•
Figures and plans are displayed in the main text of the release
•
No exploration results have been reported.
•
•
Pinnacle Minerals Ltd engaged IOS Geosciences during October 2023.
IOS Geosciences have completed field reconnaissance as planned and reported preliminary
results as contained herein.
All pegmatite lithologies mapped within the project areas require geochemical analysis to
ascertain if a relationship to relevant mineralisation processes are present. The presence of
pegmatites in outcrop and boulders alone is not sufficient to assume the presence of
mineralisation.
•
•
•
Refer to the main body of the release for further information regarding diagrams.
Exploration efforts will continue with a consolidation and review of all previous geological and
geophysical data available for the project areas.
11
Share your feedback
Discover