Field Team Mobilises to Adina East Lithium Project
Released
Released
Announcement PDF
ASX Announcement
19 October 2023
Field Team Mobilises to Adina East Lithium Project
HIGHLIGHTS
• Fieldwork at the Adina East Lithium Project (the “Project”) to commence before the end of
October1
• Quebec Based Geological Consultants IOS Services Géoscientifiques inc2 (IOS). have mobilised
to Mirage Outfitters in James Bay, in preparation for the project’s maiden exploration program
• Fieldwork of mapping and collecting rock chips aims to identify potential LCT pegmatites and
spodumene mineralisation
• A four-person geological team to follow up:
o
Mapped pegmatite occurrences3 (Ministère des Ressources naturelles et des Forêts)
o
Sentinel 2 and Synthetic Aperture Radar (SAR) generated targets4
• Spodumene-bearing pegmatite dykes discovered by Loyal Lithium Limited (LLI.ASX) located
only 6km west from the border of the project5 in a similar geological setting as Adina East
Project
• Geology and structural settings are favourable for potential lithium and gold discoveries with
the Project bordering an interpreted extension of the Trieste Greenstone Belt
Pinnacle Minerals Ltd (ASX: PIM) (“Pinnacle”, the “Company”) is pleased to announce that the field team from
Quebec based geological consultants IOS have mobilised to Mirage Outfitters in preparation for the maiden
exploration program at the Adina East Project in James Bay Quebec. It is anticipated that the team will begin
field reconnaissance work before the end of the field season.
The fieldwork aims to identify potential LCT pegmatites and spodumene mineralisation by following up on
historically mapped pegmatite outcrops and a number of lithium targets generated through detailed satellite
and radar imagery analysis (Figure 1).
News flow from the field is expected to be available in November with any assays reliant on lab availability in
Q4 2023.
Pinnacle Minerals Managing Director, Nic Matich, commented:
“Pinnacle has secured the services of respected Geological Consulting Group IOS Services
Géoscientifiques to conduct first pass exploration (“prospecting”) at the recently acquired6 Adina East
Lithium Project. Having the crew mobilised on site one (1) day after announcing the acquisition highlights
the Company’s intent to maximise shareholder value through prompt and targeted exploration.”
1 – Start and finish date is weather dependent
2 - https://www.iosgeo.com/en/
3 - Ministère des Ressources naturelles et des Forêts
4 – Pinnacle Minerals ASX announcement 17th October 2023
5 - Loyal Lithium Limited ASX announcement 16th August 2023
6 – Pinnacle Minerals ASX announcement 17th October 2023 - Requires shareholder approval
Pinnacle Minerals Ltd
Issued Capital
Australian Registered Office
Directors
ACN: 655 033 677
ASX: PIM
36,375,200 Shares
33,037,634 Options
Unit 6, Level 1, 389 Oxford Street
Mount Hawthorn WA 6016
T: + 61 8 9426 0666
E: admin@pinnacleminerals.com.au
WILLIAM WITHAM – Executive Chairman
NIC MATICH – Managing Director
LINCOLN LIU – Non-Executive Director
STEPHEN ROSS – Non-Executive Director
www.pinnacleminerals.com.au
Satellite and radar analysis
Per the Company’s announcement dated 17 October 2023, Dirt Exploration (and its principal, Dr Neil Pendock)
acquired, process and analysed Sentinel Multispectral data (Sentinel) and Synthetic Aperture Radar (SAR) data
over the Adina East Project. The analysis identified multiple areas of interest with 60 discrete targets for followup field investigation.
Of particular interest are two clusters of targets, the primary being in the central southern part of the claim
area and the secondary target on the eastern flank of the Project area. These areas have been elevated to
priority targets for follow-up mapping and rock chipping during the proposed field trip in October 2023.
The priority southern target is on trend from mapped pegmatites (Tilly Pegmatites) in Winsome Resources
(WR1.ASX) Tilly Project7 and where Winsome is planning to conduct target generation and subsequent field
activities in the latter part of 2023.
Figure 1: Adina East Project with identified pegmatite targets
About IOS Services Géoscientifiques inc8
IOS is a firm of geological consultants and mineral exploration contractors, active throughout Québec for over
23 years. IOS offers a wide range of services to mineral exploration companies, the mining industry, engineering
firms and government agencies.
IOS’s multidisciplinary approach and "one-stop" service enable clients to conduct a comprehensive exploration
campaign without having to coordinate an army of subcontractors: property management, permit application,
complete logistics, fieldwork, laboratory work, NI 43-101 Technical Report, from project generation to scoping
study. All services are streamlined into a single workflow process.
7 – Winsome Resources Limited ASX announcement 19 April 2023.
8 - https://www.iosgeo.com/en/profile/the-company/
www.pinnacleminerals.com.au
2
The Adina East Project
The Adina East Project is located in Quebec’s James Bay region (Figure 3) with a total of 147 claims encompassing
72.7km2 (7,274.47 ha) adjacent to an interpreted extension of the Trieste greenstone belt (Figure 2). Located
within Category-III lands, the Adina East Project does not carry any restrictions relating to mining or exploration
according to the James Bay Agreement.
The Project is adjacent to both Loyal Lithium’s (LLI.ASX) Trieste project where spodumene-bearing dykes were
identified less than 6km from the boundary of the Project9 and, Winsome Resources Tilly Project where
swarming pegmatites have been mapped10 and are interpreted to extend into the Adina East Project. The claims
are readily accessible from Mirage Outfitters, 75km to the Northwest of the Project, allowing year-round access.
Multiple historically mapped pegmatites exist within the Project area. These pegmatites are located
approximately 24 km along strike east in the same stratigraphic sequence and location that hosts the Winsome
Resources’ (WR1.ASX) Adina Lithium Project, which has recorded high-grade assay results of up to 4.19% Li2O
over 4.1m.11
Figure 2: Adina East Claims Highlighting Bedrock Geology and Location Relative to other Key Projects
9 – Loyal Lithium Limited ASX announcement 16th August 2023
10 – Winsome Resources Limited ASX announcement 19th April 2023
11 – Winsome Resources Limited ASX announcement 14th February 2023
www.pinnacleminerals.com.au
3
Figure 3: James Bay Province Highlighting Adina East Project Location.
This announcement has been authorised for release by the Board of Pinnacle Minerals Ltd.
For further information, please contact:
Executive Chairman
William Witham
Pinnacle Minerals Limited
T: + 61 (0) 8 9426 0666
E: admin@pinnacleminerals.com.au
Managing Director
Nic Matich
Pinnacle Minerals Limited
T: + 61 (0) 8 9426 0666
E: admin@pinnacleminerals.com.au
Media and Investor Inquiries
Jane Morgan
Jane Morgan Management
+61(0) 405 555 618
E: jm@janemorganmanagement.com.au
www.pinnacleminerals.com.au
4
About Pinnacle Minerals
Pinnacle Minerals Ltd (PIM.ASX) is an ASX listed technology minerals company focused on delivering
shareholder value via the systematic exploration and development of its portfolio of battery and technology
metals projects in Canada, Western Australia and South Australia. Pinnacle aims to deliver exploration success
via systematic and geologically rigorous techniques. The Company’s focus is the “Adina East Project” in James
Bay, Quebec which is proximal to the world class Adina Lithium Project (Winsome Resources: WR1.ASX) and
adjacent to the Trieste Lithium Project (Loyal Lithium: LLI.ASX) and the Tilly Lithium Project (WR1.ASX). The
Company’s Australian exploration assets are prospective for Rare Earth Elements, Mineral Sands and Kaolin.
Forward Looking Statements
This announcement contains ‘forward-looking information’ that is based on the Company’s expectations,
estimates and projections as of the date on which the statements were made. This forward-looking information
includes, among other things, statements with respect to the Company’s business strategy, plans,
development, objectives, performance, outlook, growth, cash flow, projections, targets and expectations,
mineral reserves and resources, results of exploration and related expenses. Generally, this forward-looking
information can be identified by the use of forward-looking terminology such as ‘outlook’, ‘anticipate’, ‘project’,
‘target’, ‘potential’, ‘likely’, ‘believe’, ‘estimate’, ‘expect’, ‘intend’, ‘may’, ‘would’, ‘could’, ‘should’, ‘scheduled’, ‘will’,
‘plan’, ‘forecast’, ‘evolve’ and similar expressions. Persons reading this announcement are cautioned that such
statements are only predictions, and that the Company’s actual future results or performance may be
materially different. Forward looking information is subject to known and unknown risks, uncertainties and
other factors that may cause the Company’s actual results, level of activity, performance, or achievements to
be materially different from those expressed or implied by such forward-looking information.
Competent person statement
The information in this announcement that relates to Exploration Targets, Exploration Results, Mineral
Resources or Ore Reserves is based on information compiled by William Witham, a Competent Person who is
a Member of The Australian Institute of Geoscientists (AIG). William Witham is a director of Pinnacle Minerals
Ltd. William Witham has sufficient experience that is relevant to the style of mineralisation and type of deposit
under consideration and to the activity being undertaken to qualify as a Competent Person as defined in the
2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore
Reserves’. William Witham consents to the inclusion in the presentation of the matters based on his information
in the form and context in which it appears.
Figure 4: Pinnacle Minerals Projects' Location Map
www.pinnacleminerals.com.au
5
Appendix 1 JORC Tables
Section 1 Historical Sampling Techniques and Data
Criteria
JORC Code explanation
Sampling
techniques
•
•
•
•
Nature and quality of sampling (e.g., cut channels, random chips,
or specific specialised industry standard measurement tools
appropriate to the minerals under investigation, such as down
hole gamma sondes, or handheld XRF instruments, etc.). These
examples should not be taken as limiting the broad meaning of
sampling.
Include reference to measures taken to ensure sample
representivity and the appropriate calibration of any
measurement tools or systems used.
Aspects of the determination of mineralisation that are Material
to the Public Report.
In cases where ‘industry standard’ work has been done this would
be relatively simple (e.g., ‘reverse circulation drilling was used to
obtain 1m samples from which 3 kg was pulverised to produce a
30 g charge for fire assay’). In other cases, more explanation may
be required, such as where there is coarse gold that has inherent
sampling problems. Unusual commodities or mineralisation
types (e.g., submarine nodules) may warrant disclosure of
detailed information.
Commentary
•
•
•
•
•
Drilling
techniques
•
Drill sample
recovery
•
•
•
Logging
•
•
•
Sub-sampling
techniques and
•
•
Drill type (e.g., core, reverse circulation, open-hole hammer,
rotary air blast, auger, Bangka, sonic, etc.) and details (e.g., core
diameter, triple or standard tube, depth of diamond tails, facesampling bit or other type, whether core is oriented and if so, by
what method, etc.).
Method of recording and assessing core and chip sample
recoveries and results assessed.
Measures taken to maximise sample recovery and ensure
representative nature of the samples.
Whether a relationship exists between sample recovery and grade
and whether sample bias may have occurred due to preferential
loss/gain of fine/coarse material.
Whether core and chip samples have been geologically and
geotechnically logged to a level of detail to support appropriate
Mineral Resource estimation, mining studies and metallurgical
studies.
Whether logging is qualitative or quantitative in nature. Core (or
costean, channel, etc) photography.
The total length and percentage of the relevant intersections
logged.
If core, whether cut or sawn and whether quarter, half or all core
taken.
If non-core, whether riffled, tube sampled, rotary split, etc., and
www.pinnacleminerals.com.au
No sampling has been
completed by Pinnacle
Minerals.
Dirt Exploration interpreted
pegmatitic rocks and trends
from the Sentinel-2 and Also-1
SAR data products.
Eight spectral bands of
Sentinel-2 VNIR imagery have
10 m spatial resolution, and
two bands of SWIR have 20 m
resolution. The Sentinel-2
scene was collected on 2 June
2023.
Rock assay data referred to in
the release is available on the
Sigeom website. Note, the
rocks represent
reconnaissance geochemistry
samples and are not part of
considered lithium
exploration.
Pinnacle will complete
reconnaissance work to verify
the interpretation presented in
this release.
•
No drilling completed
•
No drilling completed
•
No drilling completed
•
No drilling completed
6
Criteria
JORC Code explanation
sample
preparation
•
•
•
•
Quality of
assay data and
laboratory tests
•
•
•
Verification of
sampling and
assaying
Location of
data points
Data spacing
and
distribution
Orientation of
data in relation
to geological
structure
•
•
•
•
•
•
•
•
•
•
•
•
Sample security
•
Audits or
reviews
•
Commentary
whether sampled wet or dry.
For all sample types, the nature, quality and appropriateness of
the sample preparation technique.
Quality control procedures adopted for all sub-sampling stages
to maximise representivity of samples.
Measures taken to ensure that the sampling is representative of
the in-situ material collected, including for instance results for
field duplicate/second-half sampling.
Whether sample sizes are appropriate to the grain size of the
material being sampled.
The nature, quality and appropriateness of the assaying and
laboratory procedures used and whether the technique is
considered partial or total.
For geophysical tools, spectrometers, handheld XRF instruments,
etc., the parameters used in determining the analysis including
instrument make and model, reading times, calibrations factors
applied and their derivation, etc.
Nature of quality control procedures adopted (e.g., standards,
blanks, duplicates, external laboratory checks) and whether
acceptable levels of accuracy (i.e., lack of bias) and precision have
been established.
The verification of significant intersections by either independent
or alternative company personnel.
The use of twinned holes.
Documentation of primary data, data entry procedures, data
verification, data storage (physical and electronic) protocols.
Discuss any adjustment to assay data.
Accuracy and quality of surveys used to locate drill holes (collar
and down-hole surveys), trenches, mine workings and other
locations used in Mineral Resource estimation.
Specification of the grid system used.
Quality and adequacy of topographic control.
Data spacing for reporting of Exploration Results.
Whether the data spacing and distribution is sufficient to
establish the degree of geological and grade continuity
appropriate for the Mineral Resource and Ore Reserve estimation
procedure(s) and classifications applied.
Whether sample compositing has been applied.
Whether the orientation of sampling achieves unbiased sampling
of possible structures and the extent to which this is known,
considering the deposit type.
If the relationship between the drilling orientation and the
orientation of key mineralised structures is considered to have
introduced a sampling bias, this should be assessed and reported
if material.
The measures taken to ensure sample security.
The results of any audits or reviews of sampling techniques and
data.
www.pinnacleminerals.com.au
•
•
No assay or drilling data being
reported
No new geophysical or
geological data has been
collected by Pinnacle
•
All results were reviewed by
the Competent Person
•
The grid system used at the
Adina East Project is UTM
NAD83 (Zone 18)
•
No drilling completed
•
No drilling completed
•
No drilling completed
•
No audits conducted
7
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria
JORC Code explanation
Mineral
tenement and
land tenure
status
•
•
Exploration
done by other
parties
•
Commentary
Type, reference name/number, location and ownership including
agreements or material issues with third parties such as joint ventures,
partnerships, overriding royalties, native title interests, historical sites,
wilderness or national park and environmental settings.
The security of the tenure held at the time of reporting along with any
known impediments to obtaining a licence to operate in the area.
•
The claims are held by a
Electrification and
Decarbonization AIE LP
and subject to a
transaction with Pinnacle
Minerals Ltd.
Acknowledgment and appraisal of exploration by other parties.
•
Limited historical work
has been completed
within some claims, with
no exploration targeting
lithium mineralisation.
Publicly available
geological and
geophysical datasets
were sourced from
MERN via SIGEOM.
•
Geology
•
Deposit type, geological setting and style of mineralisation.
•
•
Drill hole
Information
•
•
A summary of all information material to the understanding of the
exploration results including a tabulation of the following information
for all Material drill holes:
o easting and northing of the drill hole collar
o elevation or RL (Reduced Level – elevation above sea level in metres)
of the drill hole collar
o dip and azimuth of the hole
o down hole length and interception depth
o hole length.
If the exclusion of this information is justified on the basis that the
information is not Material and this exclusion does not detract from
the understanding of the report, the Competent Person should clearly
explain why this is the case.
www.pinnacleminerals.com.au
•
The claims are located
within the La Grande sub
province, in the eastcentral Archaean
Superior Craton, Canada.
The Superior Craton is a
stable crustal block
covering Quebec,
Ontario, and southeast
Manitoba in Canada.
Locally the stratigraphy
consists of the Solomon
River Formation which is
Neoarchean in age and
is described as a
Centimetric
porphyroblastic wacke
paragneiss ± cordierite ±
staurolite ± garnet ±
sillimanite.
No drilling completed
8
Criteria
JORC Code explanation
Data
aggregation
methods
•
•
•
Relationship
between
mineralisation
widths and
intercept
lengths
•
Diagrams
•
Balanced
reporting
•
Other
substantive
exploration
data
•
•
•
In reporting Exploration Results, weighting averaging techniques,
maximum and/or minimum grade truncations (e.g., cutting of high
grades) and cut-off grades are usually Material and should be stated.
Where aggregate intercepts incorporate short lengths of high-grade
results and longer lengths of low-grade results, the procedure used for
such aggregation should be stated and some typical examples of such
aggregations should be shown in detail.
The assumptions used for any reporting of metal equivalent values
should be clearly stated.
These relationships are particularly important in the reporting of
Exploration Results.
If the geometry of the mineralisation with respect to the drill hole angle
is known, its nature should be reported.
If it is not known and only the down hole lengths are reported, there
should be a clear statement to this effect (e.g., ‘down hole length, true
width not known’).
Appropriate maps and sections (with scales) and tabulations of
intercepts should be included for any significant discovery being
reported. These should include, but not be limited to a plan view of
drill hole collar locations and appropriate sectional views.
Where comprehensive reporting of all Exploration Results is not
practicable, representative reporting of both low and high grades
and/or widths should be practiced to avoid misleading reporting of
Exploration Results.
Other exploration data, if meaningful and material, should be reported
including (but not limited to): geological observations; geophysical
survey results; geochemical survey results; bulk samples – size and
method of treatment; metallurgical test results; bulk density,
groundwater, geotechnical and rock characteristics; potential
deleterious or contaminating substances.
Commentary
•
No drilling completed
•
No mineralised widths
and intercept lengths
have been reported.
•
Figures and plans are
displayed in the main
text of the Release
•
No assay data being
reported
•
All information has been
provided as available
To the Company’s
knowledge, no material
exploration data or
information has been
omitted from this release
The Company continues
to complete a thorough
geological review of all
available data as part of
the Company’s due
diligence
•
•
Further work
•
•
The nature and scale of planned further work (e.g., tests for lateral
extensions or depth extensions or large-scale step-out drilling).
Diagrams clearly highlighting the areas of possible extensions,
including the main geological interpretations and future drilling areas,
provided this information is not commercially sensitive.
•
•
•
www.pinnacleminerals.com.au
Pinnacle’s initial
exploration program will
include target definition
and planned field
mapping and sampling
Drilling will subsequently
be completed on any key
targets identified from
the mapping and
sampling
Refer to the main body of
the release for further
information regarding
diagrams
9
Share your feedback
Discover